I meant to duplicate the "popcorn paper" technique using mat board, but I goofed. It turned out to be one of those happy accidents.
I started by spraying a deep red scrap of mat board with the texture spray described earlier. In the last project I covered the chipboard completely so that no chipboard showed through. This time I sprayed more sparsely and left mat board showing through.
Since the Twinkling H20's floated on the top when the chipboard was completely covered, I thought with some of the mat board showing through I might get a nice sparkly effect. Wrong! The Twinks completely saturated the top layer of the mat board and dried disappointingly flat. For some unknown reason, I started rubbing the surface with my finger while it was still damp. The top layer began to roll up and peel off, revealing the next layer with just a touch of color left. Interesting effect, but the picture is dark, so you have to click on it to look at the larger version to see what I mean.
One look at the resulting surface and I knew it was going to take Radiant Rains very nicely. I used Sky Blue and Periwinkle. (I get mine from After Midnight.) The rough edges resulting from rolling off part of the mat board's surface layer actually gave the piece a marbled effect.
I started by spraying a deep red scrap of mat board with the texture spray described earlier. In the last project I covered the chipboard completely so that no chipboard showed through. This time I sprayed more sparsely and left mat board showing through.
Since the Twinkling H20's floated on the top when the chipboard was completely covered, I thought with some of the mat board showing through I might get a nice sparkly effect. Wrong! The Twinks completely saturated the top layer of the mat board and dried disappointingly flat. For some unknown reason, I started rubbing the surface with my finger while it was still damp. The top layer began to roll up and peel off, revealing the next layer with just a touch of color left. Interesting effect, but the picture is dark, so you have to click on it to look at the larger version to see what I mean.
One look at the resulting surface and I knew it was going to take Radiant Rains very nicely. I used Sky Blue and Periwinkle. (I get mine from After Midnight.) The rough edges resulting from rolling off part of the mat board's surface layer actually gave the piece a marbled effect.
Once I got the color saturation I liked I decided to add a little webbing spray on top.
Here's the finished piece photographed in the sun on an angle, in a desparate attempt to get the shimmer to show up.
If I do this again, I'd change the process in the following ways. First, I'd skip the texture spray altogether because most of it rolled off when I removed so much of the surface layer. Second, I'd probably wet the top layer of the mat board with inexpensive watercolor paint rather than Twinks since none of the glimmer showed up in that early stage. Third, I'd use a different color of webbing spray. White was all I had on hand. I might even try Golden Clear Tar Gel mixed with Luminarte Primary Elements to get the webbing effect.
I love learning from happy accidents.
2 comments:
I just love the finished piece. Thanks for the experimenting that allows us to create more easily and beautifully, I might add! Willow
This is a gorgeous paper you've created - and don't you just love it when 'accidents' turn out as well as this???
I must try it out myself!
Post a Comment